Maxray Cocoon - Trigger Lock Safety Feature

//
12
Cocoon Training Manual
MaxRay Safety
NEVER attempt to operate the Cocoon handheld X-ray system if any covers, shielding material, colli-
mators, etc. have been removed. As the operator, NEVER place any part of your body in the primary
beam.
An additional safety feature is provided in the handle of the Cocoon. A trigger lock is available and
can be engaged by the operator. With the trigger in the outer position (left picture), the lock is de-
pressed from the left side. This will lock the trigger in the “o” position (right picture), not allowing
engagement of the X-ray emission electronics.
Pressing the trigger lock from the right side of the unit will unlock the trigger and allow for normal
operation.