MAXSA 43319 - User Manual

ASSEMBLY AND INSTRUCTION GUIDE
Model #s 43319, 44219, 46219, and 48219
ABOUT YOUR LED OUTDOOR WALL SCONCE
The LED Outdoor Wall Sconce is perfect for porches,
doorways, or around the house.
The LED Outdoor Wall Sconce has a built-in motion sensor,
which automatically turns on the light when movement of a
heat source (such as people, animals, or cars) is detected in
the area. The light remains on while motion continues to be
detected in the area.
The LED Outdoor Wall Sconce also has a built-in photosensor
so that the light only turns on at night.
The LED Outdoor Wall Sconce may function irregularly or not
at all at temperatures below 0°F / -17.8°C. Normal operation
will return when the temperature rises.
The LED Outdoor Wall Sconce requires 4 C cell batteries (not
included). The batteries typically last up to 1 year under
normal use.
The 2 super bright Surface Mount LEDs in the LED Outdoor
Wall Sconce produce a warm white light (~3000K) and have
an estimated life of 30,000 hours. The LEDs should never
need changing.
CHOOSING A LOCATION
The selected location should not be near light sources such as
street or porch lighting as these may cause the LED Outdoor Wall
Sconce to turn off automatically. The LED Outdoor Wall Sconce
should also be installed away from heaters, air conditioners,
barbecues, vents, large reflective surfaces such as swimming
pools and jacuzzis, and white walls.
You should also install the LED Outdoor Wall Sconce at least 30
feet away from the street, so the light is not activated by passing
cars.
CHOOSING A LOCATION, CONTINUED
Ideally, the LED Outdoor Wall Sconce should be mounted with the
detector at the height of or above the objects to be detected.
The motion sensor has a dectectable area of about 23 feet (7
meters) within a 100 degree angle of the sensor. The sensor is
more sensitive to movement across the detection area than
movement directly towards or away from the sensor.
At night, the LED lights will remain on for approximately 30
seconds after the last detected movement. If a movement is
detected while the lights are on, the light duration will be reset and
will remain on for an additional 20 seconds (approximately).
30 feet or more from street
90
Degrees
23
feet
NOTE: Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable (Nickel-Cadmium)
batteries.

Summary

About Your LED Outdoor Wall Sconce

Functionality Overview

Details the motion sensor, photosensor, and automatic activation of the light.

Performance and Battery

Covers operating temperatures, battery requirements, and estimated battery life.

LEDs and Lifespan

Describes the LEDs' brightness, color temperature, and long lifespan.

Choosing a Location

Location Considerations

Advises on avoiding interference sources like lights, heaters, and reflective surfaces.

Sensor Detection Range

Explains the optimal mounting height and the sensor's detection angle and distance.

Light Duration

Clarifies how long the light stays on after motion is detected and how it resets.

Battery Handling Warning

Warns against mixing battery types or old/new batteries.

Installation and Mounting

Tools and Batteries Required

Lists the necessary tools like a pencil, screwdriver, drill, and the required batteries.

Mounting Steps 1-3

Details the initial steps of the installation process, including preparing the mounting plate and battery compartment.

Mounting Steps 4-6

Continues the installation guide, covering the attachment of the main unit and lamp cover.

Installation and Mounting Continued

Mounting Steps 7-10

Covers the remaining physical installation steps, securing the sconce to the wall and attaching the lamp.

Using the Energy Saving Switch

Explains how to use the energy-saving switch to adjust the light output or duration.

Troubleshooting

Light Not Turning On

Addresses issues where the light fails to activate during movement, listing causes and solutions.

False Triggering

Explains reasons for the light turning on without apparent cause and how to fix them.

Light On During Daylight Hours

Provides solutions for the light activating during the day, typically related to shadows on the sensor.

Specifications and Warranty

Product Specifications

Lists technical details like battery requirements, LED specs, brightness, and detection range.

Warranty Information

Outlines the terms and conditions of the 1-year limited warranty provided by MAXSA Innovations, LLC.

MAXSA 43319 Specifications

General

Brand	MAXSA
Model Number	43319
Power Source	Solar
Batteries Included	Yes
Light Color	White
Material	Plastic
Motion Detection Angle	120 degrees
Adjustable Timer	Yes
Mounting Type	Wall Mount
Type	Solar
Voltage	3.7V
Weather Resistance	Weather Resistant
Timer Settings	15 seconds, 30 seconds, 1 minute