Maxspect Gyre User Manual

10
Operating Instructions
Switching between Modes
1. Press the Switch Mode button to cycle between the 4 Modes.
Start
Entering Setup Mode
1. Press the Setup Mode button once. The Status Indicator Light will turn
green.
Green Light
2. Press the Setup Mode button again to confirm the switch and leave
Setup Mode. The controller will also exit Setup Mode if the Controller
Unit has been idling for 60 seconds. The Status Indicator Light will
return to blue.
Blue Light
English

Maxspect Gyre Specifications

General

Brand	Maxspect
Model	Gyre
Category	Inverter
Language	English