9
Working Mode
Automatic Working Mode: a set of program with programmable brightness for each
channel, which can be cycled every 24hrs.
Manual Working Mode: The fixture will be illuminating at specific brightness until
you change it manually. Press button A can also switch among the three presets* and
the setting of Manual Mode. The indicator will turn to specific color accordingly.
*The presets can only be accessed to through button A and cannot be adjusted.
Share the Control of Fixture
Maxspect™ Jump Series LED Lighting System features a special function, which allows
you to share the control of fixture with your friends. This function can ONLY be used
in the Router Mode with Internet connection.
1. Open the APP and log in;
2. Choose the fixture which you want to share with your friend, slide the bar to the
left and click “Sharing”;
3. Select “User Account Sharing”*, input the account you want to share the
control with and click confirm;
4. On your friend's mobile device**, open the APP and log in the account you are
sharing the control with, Click on the right down side of the APP;
5. Click ;
6. Select “Invited”;
7. Click “Accept”;
8. Click , the fixture will be shown on the equipment list of the APP.
*It can also be shared by scanning the QR code by your friend's mobile device.
**The mobile device of your friend is not necessary to connect to the same WiFi
network as your mobile device connects to, as long as it is connected to the Internet.
However, the accepted account cannot share anymore the control of fixture with
other account.
To Next Page
Loading...
Need help?
General
