SLIMLINE
LED EMERGENCY EXIT LIGHT
SAFETY INFORMATION
• Please read and follow this product guide.
• Servicing and installation of this product must only be done by
qualified electrical personnel.
• Do not expose this product to dripping or splashing. Liquids may
cause failure and/or fire hazard.
• Replace with Maxspid-approved correct type of battery only.
Incorrectly replaced battery may cause failure and/or fire.
• Match the polarities of the mains supply with the terminal block
and ensure it is firmly secured. Mismatch may cause electric
shock. [Refer to Fig C]
Need help?
General
To Next Page