▶Onboard LAN Controller
Enables or disables the onboard LAN controller, options: [disabled], [enabled].
▶Legacy PXE Support
When Enabled, the system Legacy network stack will support Ipv4 protocol. This item will
appear when Network Stack is enabled.
▶UEFI PXE Support
When Enabled, the system UEFI network stack will support Ipv4/Ipv6 protocol. This item
will appear when Network Stack is enabled.
2.3 Power：
▶ACPI Setting（ACPI Energy saving）
l Enable Hibernation: Set whether to enable the hibernation (S4) function, options:
[disabled], [enabled].
l ACPI Sleep State: Set whether to enable the sleep (S3) function, options: S3(Suspend
to RAM), Suspend Disabled.
l S3 Video Repost: Control to turn on or off the sleep graphics card self-test feature.
45
To Next Page
Loading...