EasyManua.ls Logo

MAXTEK 61278 - Getting Started; Basic DVD Operation; Connecting to TV via AV Cable

MAXTEK 61278
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Basic DVD Operation
discard the white cardboard dust cover from inside the deck marked
“Warning: Please take out this card before playing”.
Connect the mains power adaptor to the mains outlet and the
DC in socket.
Turn the power switch on the right-hand side panel to ‘ON’ .
• Insert a DVD and press the play button.
Connecting to a TV (AV Cable included)
You can connect the DVD player to a TV so that your movies,
pictures and music can be played on your larger screen.
Insert the 3.5mm jack end of the 3.5mm to RCA cable into the
AV out port on the master screen.
• Connect the three RCA plugs to the corresponding coloured ports
on your TV, normally located on the back.
• Choose the correct AV channel on your TV to view the content of
the DVD player.
Please note:
If your TV does not have a ‘RCA in’ port, you may need a RCA to SCART adaptor
to use this function, if a SCART port is available.
Getting Started
(Master Screen)

Other manuals for MAXTEK 61278

Related product manuals