EasyManua.ls Logo

MaxTo M2 - Page 14

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 2 : Refer to the matching operations in 8.4 for
following operations
1. Match A and B;
2. Match B and C;
3. Match C and D;
4. Match D and E;
5. Match E and F.
Step 3 : Connect A, B, C, D, E and F in series
1. For D, press the on/off button to connect with E;
2. For C, press the on/off button to connect with D;
3.For B, press the on/off button to connect with C;
4.For A, press the on/off button to connect with B;
E and F are not disconnected after the step 2 is completed.
Now A, B, C, D, E and F are all matched successfully, you
can enter group intercom.
Note: During the 6 people group intercom, if D receives a
call, D will be disconnected temporarily from the group. A ,
B and C form a group, E and F form a group.
After D’s call is over, D will be automatically reconnected
into the group intercom and 6 people group intercom