Need help?Do you have a question about the MAXTOOLS TR200 and is the answer not in the manual?
General| Brand | MAXTOOLS |
|---|---|
| Model | TR200 |
| Category | Automobile Accessories |
| Language | English |
Bottle containing the tire sealant.
Cap for the sealant bottle.
Flexible hose connecting the sealant bottle to the tire.
Button to control the compressor operation.
Gauge to measure tire pressure.
The main air compressor unit rated at 10 Amperes.
Holder on the compressor for the sealant bottle.
Flexible hose connected to the compressor.
Power plug for connecting to a vehicle's 12V socket.
Compressor power rating.
Amount of sealant in the bottle.
Total weight of the tire repair kit.
Warnings regarding engine exhaust and tire damage during repair.
Take out compressor and sealant, shake sealant bottle.
Unravel compressor hose and screw to sealant bottle.
Screw sealant bottle hose to the tire valve.
Turn sealant bottle upside down and insert into compressor seat.
Insert 12V plug into car socket and start the engine.
Press start, inflate to desired pressure, disconnect.
Drive briefly, then re-examine tire and adjust pressure.
If tire pressure is too low, repair is not safe. Call roadside assistance.
If pressure is correct, disconnect, pack kit, and drive.
Steps to check and adjust tire pressure using the compressor.
To Next Page
