Cleaning and Storage
Use a soft, wet cloth to wipe the mainframe clean. Dirt hard to remove can be scrubbed
with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.
NOTE
Do not wash your scooter with alcohol, gasoline, acetone, or other corrosive/volatile
solvents. These substances may damage the appearance and internal structure of your
Scooter. Do not wash your scooter with a power washer or hose.
WARNING
Make sure the scooter is powered OFF, the charge cable is unplugged, and the rubber
cap on the charge port is tightly sealed before cleaning; otherwise you may damage the
electronic components.
Store your Scooter in a cool, dry place. Do not store it outdoors for extended periods of
time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate
the aging process of the plastic components and may
reduce battery life.
Tire
Inflate tires to 45 psi. Inflate both tires equally.
Tires supplied with the product are to be mounted on the wheel by a professional
repairer. Removing the wheels is complicated and incorrect assembly can lead to
instability and malfunctions
Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifi-
cations). Do not puncture the battery. Refer to your local laws and regulations regarding
battery recycling and/or disposal.
A well maintained battery can perform well even after many miles of riding. Charge the
battery after each ride and avoid draining the battery completely.
16
To Next Page
Loading...
