- 10 -
2d) Radio control
In principle, you can use any radio-control system but you should bear SAFETY, QUALITY
and SERVICE in mind!
NOTE:
MAX radio-control system from HBC with additional "intermittent release" function.
MAX radio-control system from TELENOT with additional "intermittent release" function.
- Separate documentation!
ASSEMBLY:
Connect the radio receiver to the 7-pole plug on the winch (instead of the remote cable control unit)
and fix in the driver's cabin.
Remote transmitter – winch operator (with belt or strap)
DESCRIPTION:
FUNCTION / OPERATION:
Switch the light on.
a) Switch the radio receiver on.
b) Switch the radio transmitter on.
For further information please refer to the respective radio-control manual.
A lifting spindle drive or electric speed adjustment is required for the Speed +/- function!
MAX radio control system from HBC
* Only MAXWALD winches with a disc brake allow an intermittent release of the brake!
IMPORTANT!!!
NO EXCEPTION - ALWAYS trigger the intermittent brake function before releasing the
brake.
The function must be set correctly for this purpose! Please refer to page 12.
To Next Page
Loading...