Maxwell 16 V Series User Manual

Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this
user manual are covered by the following U.S. patents and their respective foreign counterparts: 6643119, 7102877, 7180726
7203056, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7580243, 7791860, 7791861, 7816891,
7859826, 7883553, 7935155, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580 and patents pending.
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C
CELL, D CELL, CONDIS, RAD-PAK and their respective designs and/or logos are either trademarks or registered trademarks of
Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission
Maxwell Technologies, Inc. All contents copyright © 2014 Maxwell Technologies, Inc. All rights reserved. No portion of these
materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc.
USER MANUAL
Maxwell Technologies
®
Ultracapacitor Energy Storage Modules
Models:
16 V Series:
48 V Series:
 BMOD0500 P016 B01
 BMOD0500 P016 B02
 BMOD0250 P016 B01
 BMOD0110 P016 B01
 BMOD0165 P048 B01
 BMOD0110 P048 B01
 BMOD0083 P048 B01
 BMOD0165 P048 B06
 BMOD0165 P048 B09
Document 1008491
Downloaded From Oneyac.com

Maxwell 16 V Series Specifications

General

Brand	Maxwell
Model	16 V Series
Category	Camera Accessories
Language	English

Summary

Introduction

Unpacking and Handling

2.1 Unpacking

Inspect shipping carton for damage, retain materials, and verify contents before use.

2.2 Handling

Observe handling precautions to avoid damage; do not stack modules after removal from containers.

Installation

3.1 Mechanical

Details mounting orientations, environmental exposure, and torque requirements for modules.

3.2 Electrical

Covers module discharging, cabling, grounding, and terminal post preparation for safe operation.

3.2.1 Output Terminal Posts

Explains terminal types, connection depth, cleaning, and tightening torque for electrical connections.

3.2.2 Module to Module Connections

Describes series and parallel connection methods for multiple modules in a system.

3.2.3 Logic Outputs

Details overvoltage monitoring and temperature monitoring signals available from the module.

3.3 Thermal Performance

Explains heat generation, cooling methods, and thermal resistance for module longevity.

Operation

Safety

5.1 Discharge Procedure

Details the mandatory procedure for safely discharging the module before handling or installation.

Maintenance

6.1 Routine Maintenance

Outlines cleaning, fastener checks, housing inspection, and connection checks for ongoing care.

Storage

Disposal

Specification