OPERATING YOUR WINE CELLAR
It is recommended you install the wine cellar in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5ºC-18ºC (41ºF-64ºF) may not
be reached.
Recommended Temperatures for Chilling Wine.
Model: MAXWIDZ46GDP – DUAL ZONE
Control Panel Lock
Your cooler is equipped with a control panel lock feature which will lock itself automatically 3 minutes
after the last time a button is pressed.
Press the and buttons to unlock the control panel. You will hear a “BEEP” sound to alert you that
the control is now active.
ON/OFF Power
To turn OFF the appliance, press the button and hold 2 seconds.
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in green color in the temperature display
window.
The temperature range of lower zone is 13º-18ºC (55-64ºF) which is suitable for storing white and red
wines. The temperature range of upper zone is 5º-13ºC (41-55ºF) which is suitable for storing sparkling
and white wines.
If you desire to change the temperature, set the temperature as you desire by touching the or
button. Touch the button once to select the lower zone and once more to select the upper zone.
The numbers in the display window will flash. The temperature that you desire to set will increase 1ºF
or 1ºC if you touch the button once; on the contrary the temperature will decrease 1ºF or 1ºC if you
touch the button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the wine cellar will not start.
When you use the wine cellar for the first time or restart the wine cellar after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the
wine cellar is running for a few hours everything will be back to normal.
To Next Page
Loading...