EN
18
NOTICE – Risk of Damage to Material and
Property
■ Only use the device if the filter is inserted in
the suction head so that no dirt gets inside
the device.
■ Store the device only in closed rooms.
■ Do not expose the device to any moisture.
■ Use and store the device at room tempera-
ture. Do not expose it to sub-zero tempera-
tures or great temperature fluctuations.
■ Protect the device and accessories from
impacts.
■ Do not place heavy objects on the device or
its accessories.
■ Use only original accessories from the man-
ufacturer in order to guarantee that there is
no interference that may prevent the device
from working and to avoid possible damage.
■ Do not leave the device switched on unat-
tended.
■ Do not connect the device to a plug socket
during a thunderstorm.
CHARGING UP THE BATTERY
Please Note!
■ Do not charge up on a computer because
the computer might be damaged by the
high charging current.
When a red battery symbol flashes on the
display(11) or the device cannot be switched
on, the battery is too weak and needs to be
charged.
To connect the device to the plug socket, a USB
mains adapter (5 V and ≥1 A; not supplied with
the device) is required.
1. First plug the USB cable into the USB sock-
et(12) and then connect to a power source
with USB interface (preferably via a USB
mains adapter to the plug socket).
The charging process starts and a red battery
symbol flashes on the display.
To Next Page
Loading...
