EasyManua.ls Logo

MAXXMEE BK-2703 - Pore Cleansing Technique

MAXXMEE BK-2703
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
20
Clean the face and apply a care product after
each treatment.
Six attachments are supplied:
Medium round pore attachment(1) for
cleaning normal areas, e.g. the T-zone, not
suitable for the skin around the eyes
Small round pore attachment(2) for cleaning
pores in areas which are sensitive or are hard
to reach, e.g. around the nose
Large round pore attachment(3) for clean-
ing larger areas, e.g. the cheeks, not suitable
for the skin around the eyes
Extra large round pore attachment(5) for
cleaning large areas down to the neckline,
not suitable for the skin around the eyes
Oval attachment(4) for narrower sections
(e.g. the nasal wing or area around the
mouth) and for stimulating blood flow to the
skin
Microcrystalline attachment(6) for micro-
dermabrasion: Removing dead flakes of skin
through rubbing and extraction on the face
or the neckline
L
The attachments are easier to remove
from the device if they are twisted slight-
ly when pulling them off.
Pore Cleansing
For optimum results, the pores should be
opened before the application. For this purpose
you soak a small, clean flannel in hot water,
wring it out and place it on your face. As an al-
ternative you can carefully place your face above
a dish with hot water, or use the device immedi-
ately after a shower or bath.
1. Select a pore attachment depending on
the area of application and place it on the
suction head(7).
2. Press the On / Off button(9). The device
switches on.
3. To remove sebum and blackheads, place
the pore attachment on the skin and guide
it over the skin slowly in small straight lines

Related product manuals