EasyManua.ls Logo

MAXXMEE BX-710 - Charging Up the Battery; Required Accessories; Short Circuit Prevention; Charging Environment

MAXXMEE BX-710
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
16
CHARGING UP THE
BATTERY
Please Note!
A USB mains adapter corresponding to
the technical data of the device is also
required (see rating plate or “Technical
Data”). This is not supplied with the
device.
Risk of a short circuit! Do not stick any
conducting objects (e.g. a screwdriver
or similar implement) into the charging
socket.
Charge the device only in closed
rooms.
Do not charge the device in rooms with
high humidity.
It is essential that you charge up the
battery fully before you fi rst use the device
in order to achieve the maximum charging
capacity.
1. Plug the USB-C connector of the USB
cable into the charging socket (6) on
the device and the USB connector into
the socket of a suitable USB mains
adapter.
2. Connect the USB mains adapter to
an easily accessible plug socket. The
charge control lamp (7) lights up red.
When it lights up blue, the battery is
fully charged.
3. Pull the USB mains adapter out of the
plug socket and disconnect the USB
cable from the USB mains adapter and
the device.
ATTACHMENTS AND AREAS
OF APPLICATION
(Pictures C F)
Sphere attachment (8):
for large muscle groups such as
quadriceps and gluteus maximus and
for targeted relaxation for sore muscles
Fork attachment (9):
for the neck, back extensors, calves or
similar muscles
Flat attachment (11):
for relaxing the whole body
Cartridge attachment (10):
for deeper tissue and for the feet,
hands etc.
07431_Inlay_DE-EN-FR-NL_A5.indb 1607431_Inlay_DE-EN-FR-NL_A5.indb 16 19.02.2021 08:47:2219.02.2021 08:47:22

Related product manuals