Tools (supplied):
ALLEN KEY
Metric sizes:
Grips + Brake Blocks: 4
Saddle + Brakes: 5
Handlebar: 6
WRENCH
Size:
Pedals: 15
Pedals
The following parts are packed together
with the rest of the bike:
1
We recommend you use lubricating oil
(not supplied) when necessary as indicated
in the assembly instructions.
Congratulations!
You are now a proud owner of a limited edition YIWU Bike.
You are about to assemble your new bike and we are going to guide you through
the nine easy steps needed to complete the assembly. Your bike has been shipped
virtually complete and the last 10% is now up to you – but have no worries this part
is very simple!
Quick release
Step 1: INSTALLING THE HANDLEBAR:
Slot the handlebar into the head tube at a straight angle. We recommend applying
some lubricating oil to the head tube before inserting it. Adjust the height as
desired. Use an allen key (size 6) to attach the handlebar to the bike. Makesure the
bolt is tightly fastened.
To Next Page
Loading...