D
Place your sheet on the seals of the bottom
tray. Line up the edges of the sheet to the
edges of the seals.
E
Bring the top tray down, clamping the
handles onto the bottom tray. This will hold
the sheet securely between the trays.
F
Now lift both trays up together until they click
into place near the heater.
C
Peel the protective lm from the Mayku Cast
sheet. You can put this lm into household
recycling. Always check to make sure you
have removed this lm if the sheets you are
using have them.
24
Mayku FormBox - Tray Down
CL ICK
CL ICK
To Next Page
Loading...
