Need help?Do you have a question about the Maytag 12001908 and is the answer not in the manual?
Identifies the repair part number, description, and contents of the lid switch kit.
Provides steps for installing the lid switch and explains its operational parameters.
Details how to check lid switch performance and address potential issues across washer models.
Identifies the repair part number, description, and contents of the lid switch kit.
Provides steps for installing the lid switch and explains its operational parameters.
Details how to check lid switch performance and address potential issues across washer models.
This document provides instructions for installing and troubleshooting a replacement lid switch kit for Maytag top-load washers, specifically part number 12001908 (MPN 6 2306250). The kit is designed to ensure the washer operates safely by preventing it from running when the lid is open beyond a certain threshold.
The lid switch is a critical safety component in top-load washers. Its primary function is to detect whether the washer lid is closed or open. When the lid is open, the switch interrupts the power to the motor, preventing the washer from agitating or spinning. This safety mechanism protects users from potential injury by preventing access to the moving parts of the washer during operation. The new lid switch, identified by a grey button, is non-adjustable, simplifying installation and ensuring consistent performance. For Atlantis washers, the kit also includes a plunger, which interacts with the lid switch to activate the safety mechanism.
The lid switch mechanism is engineered to shut off the machine if the lid is lifted more than 1-7/8 inches. Conversely, it allows the machine to start when the lid is less than 1/4 inch high. These precise measurements are crucial for the safe and proper operation of the washer. The non-adjustable nature of the new switch means that its activation points are fixed, eliminating the need for manual calibration. The kit is compatible with both Dependable Care / Performa L Washers and Atlantis washers, though Atlantis models utilize an additional plunger component.
The installation process for the lid switch is straightforward, requiring only a Phillips screwdriver. Users are instructed to first disconnect power to the washer, then remove the console to access the existing lid switch. Lifting the lid slightly relieves pressure on the switch, making removal easier. After removing the old switch, the new one is installed, and the steps are reversed. The document emphasizes verifying proper lid opening measurements after installation to ensure the safety mechanism functions correctly. For Dependable Care / Performa L Washers, if the switch functions but the unbalance lever needs adjustment, it can be bent slightly backward or forward depending on whether the machine shuts off too early or too late. For Atlantis washers, the plunger's length is also a factor, and the enclosed plunger should be used if the machine shuts off when the lid is lower than 1/4 inch.
The document also serves as a troubleshooting guide for issues that might be misinterpreted as lid switch problems. It highlights several potential causes for improper lid switch function that are not directly related to the switch itself. These include:
By addressing these potential issues, the document helps users diagnose and resolve problems effectively, ensuring the longevity and safe operation of their Maytag top-load washers. The non-adjustable design of the new switch simplifies maintenance by removing a common point of failure or misadjustment.
General| Brand | Maytag |
|---|---|
| Model | 12001908 |
| Category | Laundry Accessories |
| Language | English |
To Next Page
