EasyManua.ls Logo

Maytag DWC7400AAW - Page 16

Maytag DWC7400AAW
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BEFORE YOU CALL FOR SERVICE Detergent cup did not empty completely
continued) Check to see that the cycle has been
Seems noisy completed.
Water circulation noise is normal. Be sure dispenser is not blocked from wash
Humming during drain is normal, action.
Dishes may not be loaded properly. Dishes Be sure dispenser is not wet when detergent
should not be touching one another, is added.
Wash arm may be hitting an item when Make sure large items placed in the front
rotating. Load items so nothing blocks the right corner of upper rack are not blocking
wash arm. the detergent cup.
Chopping or grinding noise may be heard Use fresh detergent. Store in dry, cool place.
during drain when the internal food disposer Leaks
is chopping hard items such as fruit seeds, Check to see that the dishwasher is level as
nuts, etc. described in the Installation Instructions.
Detergent cup lid hits door liner when Suds can cause the unit to overflow so
dishwasher door is opened at end of cycle measure detergent carefully. Try another
and is normal, brand of detergent. Use only detergents
Installation (location, flooring, cabinetry, designed for automatic dishwashers.
etc.) can affect noise level. Make sure you follow directions on how to
Water valve hiss during fill is normal, add a forgotten item.
Does not run properly/Won't J;ll Has an odor
Be sure door is tightly closed and latched. Soiled dishes held too long in the
Check to see that water is turned on. dishwasher can create an odor, therefore we
The cycle is not properly selected. Be sure recommend using the Rinse & Hold cycle if
the dial is turned far enough or the cycle pad available.
is completely depressed. Dishwashers will have a "'new" smell when
Cycle will start with drain, first installed.
Check your home's circuit breaker or fuse Dishwasher not draining properly. (See
box. "Does not drain properly")
Inlet hose may be kinked. Chips dlshware
Water inlet valve may be clogged with Be sure dishes are loaded according to the
sediment and in need of cleaning, instructions so they do not strike together
Does not drain properly from the wash action.
Check to see that the cycle has been We do not recommend washing fine antique
completed, china and crystal in the dishwasher.
The dishwasher may be at a pause between Do not load glasses over rack tines, or allow
cycles which is normal, to touch each other.
Drain hose may be kinked. Do not overload.
Check your home's circuit breaker or fuse For further assistance contact your Maytag
box. Reset if necessary, dealer or call Maytag Customer Assistance:
Food is backing up in the pipes at the sink.
U.S. 1-800-688-9900
If hooked up to a food waste disposer_ be
CANADA 1-800-688-2002
sure to run the disposer regularly.
Some water is normal and keeps seals from
drying.
PAGE 15

Related product manuals