SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME WATER USE
RINSE & HOLD:
Use to rinse a relatively few soiled dishes Rinse 7 Min. 2 Gal.
which are to be held until the dishwasher is
full. Turn knob to Rinse & Hold.
LIGHTCHINA:
Use for china and crystal and for loads Rinse ] 7 Gal.
containing medium to light amounts of soil. Main Wash / -- 41 Min.
Turn knob to Light/China. 2 Rinses
Dry -- 35 Min.
76 Min. + Heating Delay*
NORMAL CYCLE:
Use for washing loads containing normally PreWash 9 Cal.
soiled dishes. This would include dishloads Rinse
--- 49 Min.
with problem soils. Turn knob to Normal Main Wash
Cycle. 2 Rinses
Dry .-- 35 Min.
84 Min. + Heating Delay*
POTS & PANS:
Use for loads with heavy or dried soils. Turn PreWash 11Gal.
knob to Pots & Pans. 2 Rinses
Main Wash ._ 64 Min.
2 Rinses
Dry --- 35 Min.
99 Min. + Heating Delay*
*The TEMP BOOST SENSOR may extend the main wash to heat the water to proper temperature. The HEATING
DELAY indicator will lightwhen the cycle is being extended due to lowwater temperatures.
PAGE8
To Next Page
Loading...
