Upper Rack When loading glassware, leave a small space
between each piece so they do not touch each
The upper rack of your dishwasher is designed other during the wash cycle. Do not p/ace
with flexibility in mind. Glasses, cups, small glasses over the tines.
plates, bowls, pans, etc. can be loaded in many
different positions to suit your needs.
The rack is designed so dishes can be centered
behind a single tine and held in place by the
rack's support wires. Dishes can also be loaded at
an angle to maximize space.
\
¢
The upper rack may be removed if desired.
Push inward on the front of the rack rail ends to
unsnap. Remove rail ends and pull out rack.
To replace rack: reinsert rack, place rail ends in
position and snap fronts into place by pushing
outward.
PAGE 4
To Next Page
Loading...
