Maytag DWU7300AAX - Selecting Cycles and Options;Starting Dishwasher

SELECTING CYCLES AND OPTIONS/STARTING
DISHWASHER
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME WATER USE
NORMAL CYCLE:
Use for washing loads containing light to PreWash -- 52 Mi_. 9 Gal.
normally soiled dishes. This would include Rinse
dishloads with problem soils. Tuna knob to Main Wash
Normal Cycle. 2 Rinses
D_" --35 Min.
87 Min.
POTS & PANS:
Use for loads with heavy" or dried soils. Tuna PreWash ] 11 Gal.
knob to Pots & Pans. 2 Rinses
Main Wash -- 60 Min.
2 Rinses
Dry -- 35 Min.
95 Min.
Fan Dry Options Adding a Forgotten Item
Depress the left side of the switch to turn the For best cleaning, the forgotten item should be
heating element on during the fan dry period, added early" in the cycle.
This option provides improved drying.
1. Unlateh the door and wait until the sound of
Depress the right side of switch to tuna the
heating element off during the fan dry period, circulating water stops.
Towel drying may be necessary. 2. Open the door and add the item.
3. Pause before latehing the door. The cycle will
To Start Dishwasher continue at the point it was inten-upted.
After loading set the dial to the desired cycle.
Set the switch for the desired dry option.
NOTE: Run the water from the hot water tap to
clear the line of cold water before
starting.
Press the door until it latches. The cycle will
begin with a drain prior to fill.
PAGE 7