To Next PageTo Next PageWhat to do if my Maytag Refrigerator does not operate?
If your Maytag Refrigerator isn't operating, first ensure it's properly plugged into a working outlet. If the temperature controls are set to “OFF”, adjust them. Also, check the fuse and circuit breaker, replacing any blown fuses and resetting the breaker if needed. Finally, verify that there isn't a power outage in your area.
What to do if my Maytag Ice2O MFI2568AES Refrigerator still won’t operate?
If your Maytag Refrigerator still won’t operate, unplug it and move the food to another refrigerator. If that's not possible, use dry ice in the freezer to keep the food cold. Contact service for assistance.
Why is my Maytag Refrigerator food temperature too warm?
If the food temperature in your Maytag Refrigerator is too warm, make sure the door is closing correctly; the refrigerator should be level. Adjust the controls as needed. Ensure the condenser coils are clean, and the rear air grille isn't blocked by food items. Reduce how often and how long the door is opened. If you've recently added food, give it time to cool, or activate Max Cool.
Why is my Maytag Ice2O MFI2568AES food temperature too cold?
If the food in your Maytag Refrigerator is too cold, begin by cleaning the condenser coils. Adjust the refrigerator or freezer controls. Relocate food that is too close to the upper left air inlet. Ensure the ice bin is correctly installed.
Why are the temperature-controlled drawers too warm in my Maytag Ice2O MFI2568AES?
If your Maytag Refrigerator's temperature-controlled drawers are too warm, the control settings may be too low, so adjust them accordingly. Also, check if the freezer controls are set too low and adjust them. Ensure the drawer is correctly positioned.
Why is the ice maker in my Maytag Refrigerator not producing ice?
If your Maytag Refrigerator's ice maker is not producing ice, confirm that the ice maker switch is turned ON. Ensure the household water supply is reaching the water valve. Check for any kinks in the copper tubing and remove them or replace the tubing. Make sure the water pressure is between 35 to 100 pounds per square inch. Verify the freezer temperature is between 0° to 2° F (-18° to -17° C).
Why is my Maytag Ice2O MFI2568AES or ice maker making unfamiliar sounds?
If your Maytag Refrigerator or ice maker is making unfamiliar or loud sounds, this is considered normal operation.
How to get rid of Maytag Refrigerator odor?
If your Maytag Refrigerator has an odor, start by covering or wrapping odor-producing foods. Clean the interior of the refrigerator thoroughly. Ensure the refrigerator is plugged in and that the fuse is not blown, or the circuit breaker tripped; replace fuses or reset the breaker as necessary.
Why is the water flow slower than normal in my Maytag Refrigerator?
If the water flow in your Maytag Refrigerator is slower than normal, it may be due to low water pressure; it should be between 35 to 100 PSI. Check the water connection procedure. Inspect the copper tubing for kinks and remove them or replace the tubing if necessary. Also, the water filter may be clogged or need replacement.
Why is ice forming in the inlet tube to the ice maker of my Maytag Ice2O MFI2568AES Refrigerator?
If ice is forming in the inlet tube to your Maytag Refrigerator's ice maker, ensure that the water pressure is between 35 to 100 pounds per square inch. Make sure the saddle valve is completely open. The freezer temperature should be between 0° to 2° F (-18° to -17° C) to produce ice.
General| Brand | Maytag |
|---|---|
| Model | MFI2568AES |
| Type | French Door Refrigerator |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Finish | Stainless Steel |
| Counter Depth | No |
| Energy Star Certified | Yes |
| Width | 35.75 inches |
General advice on exercising common sense, caution, and care when operating the appliance.
Explanation of safety symbols (DANGER, WARNING, CAUTION) and their meaning for severe injury or damage.
Use to control the temperature in the refrigerator and freezer compartments. Factory presets are provided.
Senses light level in the room, used with the Autolight feature.
Use as a reminder to order or replace the filter. Press and hold for three seconds to reset lights.
Indicates a door has been left open. To deactivate, close the door or press the pad.
Use to lock all functions. Press until green light illuminates to activate.
Use to select water dispensing option.
Alerts if temperatures exceed normal range. Press and hold to deactivate.
Use to select ice.
Activate or deactivate the light. Auto, Continuous, or Off modes available.
Quickly drop compartment temperatures to minimum settings.
Defrosts less frequently to conserve energy when away.
Proper placement guidelines to ensure optimal performance and prevent malfunction.
Ensuring adequate space for air circulation and proper fit for the refrigerator.
Safe handling procedures to prevent damage during movement.
Steps to ensure the refrigerator is level for appearance and proper performance.
Instructions for safely removing refrigerator doors and drawers for installation.
Steps to reinstall refrigerator doors after they have been removed.
Procedure for removing and reinstalling the pullout freezer drawer.
Instructions for removing and installing plastic refrigerator door handles.
Notes on proper installation orientation for freezer handles.
Instructions for removing and installing metal refrigerator door handles.
Detailed steps and safety precautions for connecting the water supply line.
Proper usage and alignment for the two fresh food doors to ensure a seal.
Details the factory preset temperatures for the refrigerator and freezer compartments.
Guidance on how to change temperature settings and allow for stabilization.
A guide to adjusting refrigerator and freezer controls based on temperature needs.
Explanation of yellow 'Order' and red 'Replace' lights for the water filter.
Activate or deactivate the light. Auto, Continuous, or Off modes available.
How to activate and deactivate Vacation Mode to conserve energy.
Feature to quickly cool down compartments after door openings or loading warm food.
System alerts for exceeding normal operating temperatures due to power outage or other events.
Alerts when a door is left open for approximately three minutes.
Menu to change display units, enable alarms, adjust light levels, or activate Sabbath Mode.
Option to change temperature display between Fahrenheit and Celsius.
Disables all tones when the Alarm mode is off.
Adjusts dispenser light level based on room light detected by sensor.
Collects small spills, easily removed for cleaning. Does not drain.
Instructions for selecting water or ice mode and dispensing.
Locks or unlocks all keypad functions for the dispenser.
Information on connecting the ice maker and leveling the refrigerator for optimal production.
Location and procedure for removing the ice storage bin.
Guidance on ice maker operation, harvesting, and sounds.
Procedure for installing the ice bin and activating the ice maker.
Instructions for removing and installing the water filter cartridge.
Steps for installing the water filter for the first time.
Procedure and precautions for changing the water filter cartridge.
Technical specifications and performance data for the water filter cartridge.
Important guidelines for using the water filter safely and effectively.
Information on removing, locking, and adjusting shelves, including Spill-Catcher and Elevator™ shelves.
Details on sliding, adjusting, removing, and replacing the Elevator™ Shelf and frame.
Instructions for removing and installing the glass and frame of the crisper top.
Details on the dairy center and door buckets, including removal and installation.
Information on crisper drawers, their controls, removal, and installation.
Description of the wide drawer, its temperature control, and usage.
Instructions for removing and installing drawers and dividers within the fresh food compartment.
Details on optional accessories like the egg tray and wine trivet/can rack.
Instructions for removing and installing the freezer bin.
Information on organizing the freezer drawer with a divider.
Reference to pages 6-7 for information on the lower drawer and its removal.
Guidelines for optimal temperature and storage of fresh food items.
Tips for storing fruits and vegetables to maintain quality and extend freshness.
Recommendations for storing raw meat, poultry, and cheese safely.
Guidance on storing milk, cream, yogurt, and cottage cheese.
Recommendations for maintaining optimal freezer temperature and efficiency.
Techniques to minimize dehydration and quality deterioration for frozen foods.
Tips for efficient freezer loading to ensure proper freezing of food.
A comprehensive chart detailing recommended storage times for various foods in refrigerator and freezer.
Guide to cleaning different parts of the refrigerator, specifying what to use and avoid.
Cleaning instructions for the exterior painted surfaces of the refrigerator.
Cleaning the inside surfaces of the refrigerator compartment.
Specific cleaning methods for stainless steel finishes to prevent damage.
Cleaning procedures for door gaskets and the ice dispenser chute.
Instructions on how to access and clean the condenser coil.
Location and cleaning of the condenser fan outlet grille.
Cleaning instructions for shelves, buckets, and drawers.
Steps to eliminate odors, including cleaning and using odor absorbers.
Advice on optimizing refrigerator efficiency and reducing energy consumption.
Instructions for safely replacing light bulbs in the fresh food and freezer sections.
Specific guidance for replacing the light bulb in the freezer compartment.
Steps to prepare the refrigerator for short or long absences to prevent freezing or odors.
Procedures to follow after returning from a vacation or absence.
Instructions for preparing the refrigerator for moving to prevent damage.
Explanation of common sounds like clicking, gurgling, buzzing, and beeping, with their causes and solutions.
Diagnosing why the compressor isn't running when controls and lights are on.
Resolving problems with drawers being too warm, or food being too cold or too warm.
Troubleshooting steps for a refrigerator that is not operating or won't operate.
Addressing problems where all interior light bulbs are off.
Steps to identify and eliminate odors within the refrigerator.
Resolving water droplets inside and troubleshooting unfamiliar or loud sounds.
Addressing issues with crisper drawers not closing and refrigerator running too frequently.
Diagnosing and fixing leaks, slow water flow, bin closure, filter light, and ice formation issues.
Troubleshooting ice maker production, Temp Alarm light, and dispenser/interior light issues.
Resolving issues with door alarms not sounding and display temperatures appearing too low.
Details on parts and labor warranty coverage for one year from purchase date.
Exclusions from warranty coverage, including installation, misuse, and commercial use.
Guidance on how to obtain service, including contact information and required details.
