SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME WATER USE
RINSE & HOLD:
Use to rinse a relatively few soiled dishes Rinse 7 Min. 2 Gal.
which are to be held until the dishwasher is
full. Turn knob to Rinse & Hold.
LIGHTCHINA:
Use for china and crystal and for loads Rinse ] 7 Gal.
containing medium to light amounts of soil. Main Wash _ 41 Min.
Turn knob to Light/China. 2 Rinses
Dry, 35 Min.
76 Min. + Heating Delay °
NORMAL CYCLE:
Use for washing loads containing normally l'reWash | 9 Gal.
soiled dishes. This would include dishloads Rinse
with problem soils. Turn knob to Normal Main Wash -- 49 Min.
Cycle. 2 Rinses
Dry -- 35 Min_
84 Min. + Heating Delay*
POTS & PANS:
Use for loads with heavy" or dried soils. Turn PreWash | 11 Cal.
knob to Pots & Pans. "2Rinses
Main Wash -- 64 Min.
2 Rinses
Dry, -- 35 Min_
99 Min. + Heating Delay ° _.____._.__
*The TEMP BOOST SENSOR may extend the main wash to heat the water to proper temperature. The HEATING
DELAY indicator will light when the cycle is being extended due to low water temperatures.
PAGE8
To Next Page
Loading...
Need help?
General
