Maytag JetcleaN SERIES User Manual

Options Delay Start
You can delay the start of the Pots & Pans cycle
Temp Boost Sensor up to six hours. To set up a delay; turn the dial to
If for any reason the incoming water the number of hours you would like the Pots &
temperature is below 120°F, press the On Pans cycle dela'yed.
button to assure the water is heated to proper
temperature for best cleaning and drying TO Start Dishwasher
results. The dial will pause at the _ to extend After loading set tile dial to the desired cycle.
the main wash and the Heating Delay- light will Press button for desired options.
turn on. NOTE: Run the water from the hot water tap to
Press the Off button to cancel the Temp Boost clear the line of cold water before
Sensor. starting.
Heated Rinse and Dry Options Press the door until it latches. The cycle will
begin with a drain prior to fill and the On
RINSE TEMP indicator will light.
Press the Sani button to turn the heating
element on during all rinses. The Sani option Indicator Lights
helps maintain water temperature and improve When Delay Start is selected the Delay Start
drying results, light glows until the cycle begins. The On light
Press the Normal button if Sani is not desired, indicates that the dishwasher is operating. At
The heating element will be off'in all rinses, the end of the dry pbase Clean willremain lit
until tlle dial has been ad_mced to the _). The
FAN DRY tteating Delay"light indicates that the main
Press the Heat button to turn the heating wash is being extended to heat the water to
element on during the fan dry period. This proper temperature.
option improves drying results.
Adding a Forgotten Item
Press the Air button to turn the heating element
off during the fan &T period. Towel drying may For best cleaning, the forgotten item shonld be
be necessary, added early in the cycle.
NOTE: Temp Boost Sensor, Rinse Temp and 1. Unlatch the door and wait until the sound of
Fan Dry options can be used separately circulating water stops.
or together. 2. Open the door and add the item.
3. Pause before latcbing the door. The cycle will
eontinne at the point it was interrupted.
PAG E 9

Maytag JetcleaN SERIES Specifications

General

Type	Built-In
Control Type	Electronic
Number of Options	4
Energy Star Certified	Yes
Soil Sensor	Yes
Wash Cycles	Heavy, Normal, Rinse Only
Options	Hi Temp Wash, Delay Start
Color	Stainless Steel
Warranty	1-Year Limited Warranty