Maytag JetcleaN SERIES User Manual

SELECTING CYCLES AND OPTIONS/STARTING DISHWASHER
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME WATER USE
RINSE & HOLD:
Use to rinse a relatively few soiled dishes Rinse 7 Min. 2 Gal.
which are to be held until the dishwasher is
full. Turn knob to Rinse & Hold.
QUICK WASHRINSE:
Use to quickly wash dusty or very lightly soiled Wash | 5 Gal.
dishes you wish to store or reuse immediately. 2 Rinses _- -- 17 Min.
Turn knob to Quick Wash/Rinse.
LIGHTCHINA:
Use for china and crystal and for loads Rinse _ 7 Gal.
containing medium to light amounts of soil. Main Wash [_ --4I Min.
Turn knob to Light/China. 2 Rinses |
--35 Min.
76 Min. + Heating Delay _
NORMAL CYCLE:
Use for washing loads containing normally PreWash ] 9 Gal.
soiled dishes. This would include dishloads Rinse
with problem soils. Tuna knob to Normal Main Wash -- 49 Min.
Cycle. 2 Rinses
l)ry -- 35 Min.
84 Min. + Heating Delay*
POTS & PANS:
Use for loads with heavy or dried soils. Turn PreWash ] 11 Gal.
knob to Pots & Pans. 2 Rinses
Mai. Wash --64 Min.
2 Rinses
D U --35 Min.
99 Min. + Heating Delay*
*The TEMP BOOST SENSOR mayextend the main wash to heat the water to proper temperature. The HEATING
DELAY indicator willlight when the cycleis being extended due to low water temperatures.
PAGE 8

Maytag JetcleaN SERIES Specifications

General

Type	Built-In
Control Type	Electronic
Number of Options	4
Energy Star Certified	Yes
Soil Sensor	Yes
Wash Cycles	Heavy, Normal, Rinse Only
Options	Hi Temp Wash, Delay Start
Color	Stainless Steel
Warranty	1-Year Limited Warranty