Maytag MAH4000 series User Manual

Model: MAH4000 1
Welcome..... ............................... ............... ................ ....
Welcome and congratulations
on your purchase of a Maytag
Neptune'" washer. Your com-
plete satisfaction is very' impor-
tant to us.
2) IMPORTANT: Keep this guide and the sales receipt
in a safe place for future reference. Proof of origi-
nal purchase date is needed )br warranty service.
Please attach your sales receipt here.
Read this manual for best
results. It contains instructions
to acquaint you with proper
operating and maintenance pro-
cedures.
In addition you will find a Laundering Tips guide
packed with your clothes washer. It contains information
on recommended laundering procedures, stain removal
and special laundering situations.
Save time and money. If something should
go wrong, we suggest consulting the
"Before You Call" section in the back of this
book. It is designed to help you solve basic
problems before consulting a servicer.
However, should you need assistance in the future, it is
helpful to:
1) Have complete model and serial number identifica-
tion of your washer. This is located on a data plate on the
center top edge of the control panel. Record these num-
bers below for easy access.
Model Number
Serial Number
If you have questions, write us (include your model
number and phone number) or call:
Maytag A'_pliances Sales Company
Attn: CAIR sMCenter
EO. Box 2370
Cleveland, TN 37320-2370
1-888-462-9824 USA & CANADA
1-800-688-2080 USA TTY (for deaf, hearing
impaired or speech impaired)
(Mon.-Fri., 8am-8pm Eastern Time)
Internet: http://www.maytag.com
For service and warranty information, see back page.
our app_nces, it may be necessary to make changes to
the appliance Without revising this guide.

Maytag MAH4000 series Specifications

General

Brand	Maytag
Model Series	MAH4000
Color	White
Voltage	120 V
Frequency	60 Hz

Summary

Important Safety Instructions

Controls At A Glance

Load the Clothes Washer

Load the tub fully but not tightly. Avoid overloading for best cleaning and performance.

Select Fabrics

Choose fabric selection to set tumble/pause pattern and spin speed for the cycle.

Select Wash/Rinse Water Temperatures

Select temperatures based on garment care labels and load type for optimal results.

Select Options

Choose additional cycle options like Max Extract, Extra Rinse, or Stain Cycle for specific needs.

Select the Signal

Turn the signal ON for an audible alert upon cycle completion, or OFF for silence.

Select Cycle

Rotate the control dial to choose the desired wash cycle based on load type and soil level.

Start Your Maytag Neptune™ Washer

Close the door, add detergent, and press the START/STOP button to begin the wash cycle.

Features

Detergent

Information on using high efficiency (HE) or regular detergents for optimal cleaning.

Automatic Dispenser

Details on the three-compartment dispenser for detergent, bleach, and softener.

Bleach Compartment

Instructions for adding chlorine bleach, including maximum fill line and dispensing timing.

Softener Compartment

Guidance on adding liquid fabric softener to the designated compartment.

Care and Cleaning

Cleaning the Dispenser

Procedure for removing and cleaning the two-compartment dispenser for optimal performance.

Storing the Clothes Washer

Steps to prepare the washer for storage, including water removal and protection.

Replacing Interior Light

Instructions for safely unplugging and replacing the interior light bulb.

Reversing the Clothes Washer Door

Step-by-step guide to change the direction of the clothes washer door swing.

Before You Call

Load Is Too Wet at End of Cycle

Troubleshooting tips for loads that remain too wet after the spin cycle.

Leaks Water

Checks to perform if the washer is experiencing water leaks.

Won't Spin or Drain

Solutions for the washer failing to spin or drain properly.

Stops

Guidance for when the washer stops unexpectedly during a cycle.

Tub is Completely Full of Suds

Advice on how to handle a tub completely filled with excessive suds.

Fills with the Wrong Temperature Water

Troubleshooting for incorrect water temperatures filling the washer.

Cycle Selector Knob Advances Through "OFF"

Checks for issues with the cycle selector knob advancing past the OFF position.

Won't Fill

Steps to take if the washer is not filling with water as expected.

Won't Tumble

Troubleshooting tips for when the washer tub does not tumble.

Door Locked Shut; Will Not Open

Solutions for the washer door remaining locked after the cycle completes.

Freshening Your Washer

Procedure to clean and freshen the washer, including the door seal.

Is Noisy

Tips for diagnosing and resolving unusual noises during operation.

Operating Sounds

Questions & Answers

Maytag® Neptune™ Washer Warranty

Full One Year Warranty

Details of the comprehensive warranty covering parts and labor for the first year.

Limited Warranty

Information on parts replacement coverage for the second through tenth year.

Additional Limited Warranty Against Rust-Through

Specific warranty coverage for rust-through on the exterior cabinet.

To Receive Warranty Service

Instructions and contact information for obtaining warranty service or assistance.

What is not covered by these warranties:

Exclusions and limitations of the provided warranties.