Maytag MAV7000 User Manual

Safety warnings and precautions for servicing, focusing on electrical shock and dangerous conditions.

Lists the Maytag washer models covered in this service manual.

Covers pre-installation needs like electrical, plumbing, and appliance placement.

Details proper electrical grounding and safe unpacking procedures for the washer.

Step-by-step guide for installing the washing machine, including leveling.

Checklist for final installation and considerations for special installation environments.

Details key specifications like capacity, electrical, motor, dimensions, and finish.

Provides data on agitator/spin speeds, amperage, wattage, and component resistance.

Charts detailing cycle timings and options for various wash cycles and colors.

Lists specialized tools needed for servicing Maytag washers, with part numbers.

General explanation of the washer's mechanical operation and components.

Detailed description of the clutch assembly and its function.

Describes the function and components of the drive pulley and cam system.

Explains the mechanical processes for the agitation and spin cycles.

Provides a visual breakdown of all major washer components.

Instructions for removing and reinstalling the control panel.

Servicing vertical switches and removing the timer mechanism.

Instructions for removing and testing the ATC board.

Procedures for servicing the top cover, lid, and detergent dispenser.

Servicing the torsion rod and removing the front panel.

Accessing the rear panel and servicing the cabinet body.

Instructions for servicing the base and stabilizer assemblies.

How to service the hinges connecting the top cover to the cabinet.

Describes the location, function, and servicing of the water mixing valve.

Details on the water inlet flume and the various water hoses.

Instructions for removing and servicing the tub top.

Procedures for servicing the agitator, inner tub, and outer tub assembly.

Instructions for removing and servicing the pump assembly.

Detailed steps for removing and servicing the water valve injection system.

Instructions for removing and servicing the stainless steel spinner assembly.

Describes servicing the suspension housing and tub braces.

Instructions for removing and replacing suspension springs using specialized tools.

Procedures for removing and servicing the seal nut assembly.

Instructions for servicing the upper bearing and seal housing.

Details on replacing the tub seal and ensuring proper sealing.

Explains the operation and servicing of the drive pulley and cam components.

Troubleshooting transmission problems and performing torque tests.

Describes the brake and snubber assembly and its servicing.

Instructions for servicing the transmission housing and replacing the oil seal.

Procedures for removing and servicing the lower bearing assembly.

Steps for removing the entire transmission assembly from the washer.

Lists and describes the test equipment required for electrical diagnostics.

Covers general electrical testing, grounding, and voltage checks.

Details on testing the timer and understanding its sequence chart.

Procedures for testing the Automatic Temperature Control (ATC) board.

Testing procedures for the microprocessor-based temperature control board.

Testing timer switches, ATC board procedures, and water valve testing.

Procedures for testing the thermistor and motor components.

Explains the operation of the motor switch and its role in speed selection.

Instructions for testing the motor overload protector and switch.

Details on how to mount and dismount the motor assembly.

Procedures for testing the water level switch and its function.

Testing procedures for selector switches and option switches.

How to test the lid switch for proper continuity and function.

A guide to diagnosing common washer problems using flow charts.

Addresses 'Will Not Fill', 'Slow Fill', 'Water Temperature Incorrect', and 'Overfills'.

Covers issues such as 'Water Leaks', 'Fills Will Not Agitate', and 'Excessive Noise'.

Addresses 'Will Not Spin', 'Slow Spin', and 'Clothes Wet After Spin' problems.

Covers 'Tub Full Of Water', 'No Timer Advance', and 'No Rinse Fill' problems.

Lists models and the corresponding page numbers for their electrical schematics.

Detailed electrical schematic for Maytag washer models MAV4057 and MAV4500.

Detailed electrical schematic for Maytag washer model MAV5000.

Detailed electrical schematic for Maytag washer model MAV5057.

Detailed electrical schematic for Maytag washer model MAV6000.

Detailed electrical schematic for Maytag washer model MAV6057.

Detailed electrical schematic for Maytag washer model MAV7000.

Detailed electrical schematic for Maytag washer model MAV7057.

Detailed electrical schematic for Maytag washer model MAV8000.

Detailed electrical schematic for Maytag washer model MAV8057.

Detailed electrical schematic for Maytag washer model MAV8500.

Detailed electrical schematic for Maytag washer model MAV6200.

Detailed electrical schematic for Maytag washer model MAV6257.

Detailed electrical schematic for Maytag washer model MAV6300.

Detailed electrical schematics for Maytag washer models MAV7200 and MAV7600.

Detailed electrical schematic for Maytag washer model MAV7700.

Detailed electrical schematic for Maytag washer model MAV8600.

Detailed electrical schematic for Maytag washer model MAV9600.