EasyManuals Logo

Maytag PERFORMANCE SERIES User Manual

Maytag PERFORMANCE SERIES
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
WASHER USE
iI
RAPID
POWER DELICATE ESTIMATEDTIME
REMAINING
ADD A GARMENT 1
PREWASH _D
WASH
RINSE
SPIN RINSE START
-& SPIN
CLEAN
PAUSE/CONTROLS LOCKED SANITARY CANCEL
D 0 0 R L0 CKED _{ {_t'_ _
PREWASH
t HI GH H 0 T/ C 0 LD _ :! STA IN CY CLE
MEDIUM WARM/WARM
LOW WARM/COLD EXTRA RIN SE
i! NO SPIN i_COLD/COLD
(_ l@ ICYCLES'GNAL
'_ SPIN WASH/RINSE
SPEED TEMP
ALL AUTO TEMP
CONROL
NOTE: The panel shown above may be different from that of your model.
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
The following is a guide to using your washer. Please refer to specific sections of this manual
for more detailed information.
Do not store laundry products on the top surface of this washer. Vibration is normal during
operation.
Use only High Efficiency detergents. The package for this type of detergent will be marked
"HE" or "High Efficiency." This wash system, along with less water, will create too much
sudsing with a regular non-H E detergent. Using regular detergent will likely result in washer
errors, longer cycle times, and reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's instructions to determine the
amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use
less detergent based on the load size.
Use only HI__High Lfficiency detergent.
First Wash Cycle Without Laundry
Before washing clothes for the first time, if not completed during the final installation step,
choose the Normal cycle and run it without clothes. Use only HE High Efficiency detergent.
Use V_ the manufacturer's recommended amount for a medium-size load. This initial cycle
serves to ensure the interior is clean before washing clothes.
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Maytag PERFORMANCE SERIES and is the answer not in the manual?

Maytag PERFORMANCE SERIES Specifications

General IconGeneral
BrandMaytag
ModelPERFORMANCE SERIES
CategoryWasher
LanguageEnglish

Related product manuals