To Next PageTo Next Page
Need help?Do you have a question about the Maytag UMV1152BAB/W/Q/S and is the answer not in the manual?
General| Power | 1000 Watts |
|---|---|
| Turntable | Yes |
| Sensor Cooking | Yes |
| Convection | No |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Lock | Yes |
| Defrost Function | Yes |
| Keep Warm Function | Yes |
| Type | Over-the-Range |
| Color | Black |
| Control Type | Electronic |
Manual covers 2004 Maytag, Amana, and Jenn-Air Over the Range Domestic Microwaves.
Precautions to avoid exposure to microwave radiation during operation and service.
Guidelines for safe servicing, including disconnection, capacitor discharge, and interlock switches.
Procedures for measuring radiation leakage with outer panel removed and fully assembled oven.
Diagnosing issues when the unit operates but produces little or no heat.
Diagnosing heating failures when the display counts down, checking interlock switches and thermostat.
Procedures to test continuity and resistance of the high voltage transformer.
Steps to test the high voltage capacitor for proper resistance and continuity.
Procedures for testing magnetron terminals and ground for continuity and resistance.
How to test the high voltage diode for proper resistance in both directions.
Testing interlock switches (Primary, Secondary, Monitor) for continuity when doors are open/closed.
Procedures for testing magnetron and oven thermal cut-outs for continuity at specific temperatures.
Testing continuity of touch pad buttons and traces for the UMV1152B** model.
Testing continuity of touch pad buttons and traces for the MMV1153A** model.
Testing continuity of touch pad buttons and traces for the AMV1162A** model.
Testing continuity of touch pad buttons and traces for the AMV4204A** model.
Testing continuity of touch pad buttons and traces for the MMV4205A** model.
Testing continuity of touch pad buttons and traces for the AMV5164A** model.
Testing continuity of touch pad buttons and traces for the MMV5165A** model.
Testing continuity of touch pad buttons and traces for the AMV5206A** model.
Testing continuity of touch pad buttons and traces for the MMV5207A** model.
Testing continuity of touch pad buttons and traces for the JMV8208A** model.
Procedures for removing the oven door and disassembling its components.
Detailed steps for removing the PC board from the control panel assembly.
Steps for removing interlock switches and testing them before replacement.
Detailed steps for safely removing the high voltage capacitor.
Steps for removing the high voltage transformer from the unit.
Steps for safely removing and replacing the magnetron.
Steps for replacing the magnetron thermal fuse.
Locating and preparing a dedicated, grounded outlet for the microwave.
Explains the importance of proper venting and available methods (roof, wall, room).
Procedures for attaching the mounting plate securely to the wall and studs.
