Maytag Washer/Dryer - User Manual

Other manuals for Maytag Washer/Dryer

Use And Care Guide48 pages

Questions and Answers

G
Gavin WareJul 26, 2025
Why is my Maytag Washer/Dryer vibrating or off-balance?
- D
  dicksonrodneyJul 26, 2025
  Your Maytag Washer/Dryer might be vibrating or off-balance due to several reasons. The feet might not be in contact with the floor and locked. Ensure the front and rear feet are firmly touching the floor and that the washer/dryer is level. The jam nuts should be tightened against the bottom of the cabinet. Alternatively, the washer/dryer may not be level. Check the floor for flexing or sagging. If the flooring is uneven, placing a 3/4" (19 mm) piece of plywood underneath can help reduce the sound. An unbalanced load can also cause this issue. Make sure to load dry items in loose heaps evenly around the basket wall. Avoid tightly packing the items and do not wash single items.
K
Katherine MorrisAug 6, 2025
What to do if my Maytag Washer/Dryer load is unbalanced?
- J
  James TaylorAug 6, 2025
  If your Maytag Washer/Dryer load is unbalanced, make sure to load dry items in loose heaps evenly around the basket wall. Avoid adding wet items or extra water, and do not tightly pack the load. It's also best to avoid washing single items.
V
velezstevenAug 14, 2025
How to level a Maytag Washer/Dryer?
- R
  Richard EvansAug 14, 2025
  To level your Maytag Washer/Dryer, ensure the front and rear feet are firmly in contact with the floor. Also, make sure the jam nuts are tight against the bottom of the cabinet. Check the floor for flexing or sagging. If the flooring is uneven, a 3/4" (19 mm) piece of plywood placed under the washer/dryer can help.