EasyManua.ls Logo

Maytronics Dolphin DYNAMIC 2002 User Manual

Maytronics Dolphin DYNAMIC 2002
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Repair instructions for - TOP1
Question and Answer IconNeed help?

Do you have a question about the Maytronics Dolphin DYNAMIC 2002 and is the answer not in the manual?

Maytronics Dolphin DYNAMIC 2002 Specifications

General IconGeneral
BrandMaytronics
ModelDolphin DYNAMIC 2002
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Summary

Tools Needed for Repair

Dolphin Pool Cleaner Dismantling

Testing and Replacing Main Components

Analyze Dolphin Power Supply

Test the power supply using the Dolphin tester. A green light indicates it is good; no light means replacement is needed.

Analyze Dolphin Cable

Connect the Dolphin tester to the cable and power supply. A green light confirms cable integrity.

Repair and Replace Dolphin Cable

Procedure for cutting, stripping, crimping, and reassembling the Dolphin pool cleaner cable.

Replace Dolphin Motor Unit

Steps to remove and replace the motor unit after testing power supply and cable.

Dolphin Brush Replacement

Remove Dolphin Brushes

Instructions on removing spacers, shafts, and wheel bearings from the brush assembly.

Install Dolphin Brushes

Guidance on removing and replacing PVC brushes using pliers and optional lubrication.

Dolphin Filter Bag Maintenance

Remove Dolphin Filter Bag

Accessing and removing the filter bag by sliding plastic clips and detaching from the metal frame.

Install Dolphin Filter Bag

Ensuring the elastic band is fully down on the bottom plate to prevent debris escape when reinstalling.