Batteries switch remote control button 8. When batteries switch is turned on the voltage
indicator pointer indicates the voltage of the embedded network.
The batteries are to be switched off at the parking as well as in order to disconnect energy
consumers in cases of emergency.
In case the remote control doesn’t operate, the switch can be turned on or off by pressing the
button on the switch case that is located on the front or rear wall of the battery container.
Tachograph 11 is a device that shows the speed, current time and the total distance passed. On
a special disc there is a recording (ciphered) of the speed, way and drivers’ (one or two) working
regime.
Remote control of the independent air heater (if installed). It is dedicated for switching on/off
of the heating regime and setting of the cab temperature that is kept automatically by an
independent air heater.
To Next Page
Loading...