Before lifting of spare wheel it is necessary to dress the rope so, that hook should be located in
the middle of link rail.
To the driver’s attention!
It is categorically prohibited to be in the zone of lifting and lowing of wheel
Самозатягивающийся узел Self- tightening unit
1 – traverse; 2 – wheel; 3 – pressing; 4, 5 – nut;
6 – holder; 7 – lifter; 8 – point of lubrication
Figure 29- Fastening of spare wheel (MAZ -650136)
Spare wheel is set on the dump-truck MAZ-555035 on the special bracket, fastening from the
right side to the frame.
It is necessary for lowering of spare wheel: (see Figure30)
- To unscrew nuts 2 of bolt fastening of holder 6 to the bracket 1
To Next Page
Loading...