EasyManua.ls Logo

Mazda 2004 6 - Driver Controls and Switches; Lighting and Wiper Controls

Mazda 2004 6
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Switches
Quick Tips 2004 Mazda Mazda6 page 8
page 9
1 2
3
Wiper/washer
control lever
Intermittent wiper:
One click down
To change interval speed:
Rotate inner ring (3)
Normal wiper speed: Two
clicks down
Turn signal/lighting
control lever
OFF = Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate
knob (1) to second notch
High beams on/off: Push forward/
pull back to detent
To flash high beams: Pull back
slightly and release
Turn signals right/left: move
lever up/down
= Fog lights on: Rotate knob
(2); functions only with headlight
low beams on
Tip: Headlights switch off auto-
matically within 30 seconds if
lights are left on and switch is
in lock position or key removed
Fast wiper speed: Three
clicks down
Single wipe: Push stalk up
Washer: Pull stalk back
Power window switches
Ignition switch must be in ON
position
All windows controlled from the
driver’s armrest; passenger doors
have separate switches
Driver’s window
One-touch-down: Push
down AUTO switch (3) firmly
and release, window goes down
all the way; pull switch back
briefly to stop; press lightly
and hold for normal operation
Passenger window switches
Push switch (4) down and
hold to open; pull back
and hold to close
Power window lockout
switch
Press button (5) down until clicks,
only driver’s window operates;
press again and passenger
windows function again
*Denotes optional equipment
A
U
T
O
5
4
3
LR
2
1
Dual power mirrors
Ignition switch must be in ACC
or ON position
Switch is on driver’s door
To adjust left/right mirror:
Press selector switch (1) left/right,
press switch (2) in direction of
desired movement
Tip: To lock mirrors in place,
move selector switch to center
position

Related product manuals