Black plate (85,1)
Before Getting In
l
Be sure the windows, outside mirrors,
and outside lights are clean.
l
Inspect inflation pressures and
condition of tires.
l
Look under the vehicle for any sign of
a leak.
l
If you plan to back up, make sure
nothing will be in your way.
NOTE
Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.
After Getting In
l
Are all doors closed and locked ?
l
Is the seat adjusted properly?
l
Are the inside and outside mirrors
adjusted?
l
Is everyone's seat belt fastened?
l
Check all gauges.
l
Check all warning lights when the
ignition switch is turned to the ON
position.
l
Release the parking brake and make
sure the parking brake warning light
goes off.
Always be thoroughly famili ar with your
Mazda.
Before Driving Your Mazda
Before Starting the Engine
4-7
MX-5 Miata_8T72-EA-04G_Edition1 Page85
Wednesday, June 9 2004 3:4 PM
Form No.8T72-EA-04G
To Next Page
Loading...
