Black plate (91,1)
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and push the tab to remove the key
from the transmitter.
Tab
2. Insert a small screwdriver into the slot
and gentl y pry open the transmitter.
3. Remove the battery.
4. Put in the new battery (CR1620 or
equivalent) with the positive pole (
)
facing down.
5. Align the front and back covers and
snap the transmitter shut.
6. Install the key to the transmitter.
qService
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
CAUTION
Changes or modifications not expressly
approved by the party respon sible for
compliance could v oid the user's
authority to operate the equipment.
Knowing Your Mazda
Doors and Locks
3-7
Mazda MPV_8T51-EC-04G_Edition3 Page91
Friday, December 17 2004 11:10 AM
Form No.8T51-EC-04G
To Next Page
Loading...
Need help?
General
