Black plate (16,1)
CAUTION
When returning a rear-reclined seatback
to its upright position, make sure you
hold onto the seatback with your other
hand while operating the lever. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
q
Height Adjustment (Driver's Seat)
By moving the seat lever up or down, the
seat bottom height can be adjusted.
Down
Up
qLumbar Support Adjustment
(Driver's Seat)
To adjust the lumbar support, pull the
lever forward.
qHead Restraint
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height ad justment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passen ger's ears,
never the passenger's neck.
2-4
Essential Safety Equipment
Seats
Mazdaspeed6_8V77-EA-06F_Edition1 Page16
Tuesday, May 9 2006 10:43 AM
Form No.8V77-EA-06F
To Next Page
Loading...
