Black plate (348,1)
Explanation Command
39 Retrain
40 Setup Confirmation Prompts
41 Setup Language
42 Setup Pairing Options
43 Pair A Phone
44 Transfer Call
45 Yes
NOTE
After user voice registration is completed,
voice guidance “Speaker enrollment is
complete, returning to main menu” is
announced.
qDTMF (dial tone multi-frequency
signal) transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the phone button (Short press).
2. Say: [Beep] “Send XXXX...” (Say
DTMF code)
3. Prompt: “Sending XXXX... (DTMF
code)”
When the Bluetooth
Hands-Free cannot be used
The Blue tooth Hands-Free cannot be used
under the following conditions:
l
Outside of the communication area.
l
Mobile telephone has a malfunction.
l
Mobile telephone is not connected to
the hands-free unit equipped on the
vehicle.
l
The mobile telephone battery is weak.
l
The mobile telephone is turne d off.
l
The mobile telephone is placed where
radio reception is difficult.
6-118
Interior Comfort
Bluetooth Hands-Free
CX-9_8X56-EA-07E_Edition2 Page348
Monday, June 4 2007 9:56 AM
Form No.8X56-EA-07E
To Next Page
Loading...
