Black plate (43,1)
q
LATCH Child-Restraint System
Installation Procedure (Rear Seats)
1. Expand the open seams on the rear of
the seat bottom slightly to verify the
locations of the LATCH lower anchors.
NOTE
The markings above the LATCH lower anchors
indicate the locations of LATCH lower
anchors for the attachment of a child-restraint
system.
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. Please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Anchor bracket location
Tether strap position
Tether strap
Anchor
bracket
Essential Safety Equipment
Child Restraint
2-31
RX-8_8X44-EA-07G_Edition1 Page43
Friday, May 11 2007 5:2 PM
Form No.8X44-EA-07G
To Next Page
Loading...
