Mazda 2009 RX-8 - Outside Temperature Display

22
 • Pressanychannelpreset
on-screenbuttonforabouttwo
secondsuntilabeepsoundis
heard.Theselectedpreset
channelnumberandstation
frequencywillbedisplayedand
arenowheldinmemory.
 • Repeattostoreotherstations.
  Totunetooneinmemory,
selectband,thenpressits
channelpresetbutton.
Thestationfrequencyand
thechannelnumberwill
bedisplayed.
Auto-Memory
PressandholdtheAUTO-Mbutton
tostoreadditionalAM/FMstations
withoutdisturbingthepreviously
setchannels.RefertoyourOwner’s
Manualforcompletedetails.
Outside Temperature Display
Pushoutsidebuttontodisplayoutside
temperatureintheinformationdisplay.
1. PresstheMENUbutton.
2.SelecttheSetClocktab.
3.Choosea24-hourdisplayor
a12-hourdisplay.
4.Usethe+hourand-hour
tabstoenterthecorrecthour.
5.Usethe+30min(minutes)and
-30mintomoveminutesahead
orbackby30minutes.
6.PresstheOKtabtoexit.
7. GPSautomaticallysetstheclock,
however,itmaybenecessary
toadjusthoursindifferenttime
zonesordaylightsavingtime.
SETTING YOUR CLOCK
1.Placetheignitioninthe
ACCorONposition.
2. P r e s s 
LOAD /
3.PresstheLOAD
on-screenbuttonlightly.
4.Waitforthescreen
tolower.
5 . InserttheCDafter“IN”
isdisplayedonthe
InformationDisplay.
TheCDwillbeginplaying
afterthescreencloses.
TO PLAY A CD
164831_09a_RX-8_SSG_081208.indd 23 8/12/08 3:50:03 PM