Mazda 2009 RX-8 - Seat Adjustments; Electronically Operated Driver Seat

3
Seats
To Program the Memory Seat Function:
1 Parkthevehicle.
2 AdjusttheseattothedesiredpositionusingtheSlide/Tiltand
Reclineswitches.
3 WhileholdingthememoryseatswitchSETbuttonpressoneofthe
threeprogrammingbuttonsuntilabeepsoundisheard.Programming
isnowcomplete.Programtheremainingtwobuttonsasdesired.
Toreturntotheprogrammedposition,closethedriver’sdoor,turntheignition
ONandpressandholdthedesiredprogrambuttonwhiletheseatmovesto
theprogrammedposition.Whentheprogrammedpositionisreached,abeep
soundwillbeheardandthebuttoncanbereleased.
Note:
Youcanalsoprogramoneseatpositionforeachadvancedkey/retractable
typekeyusedwiththevehicle.SeetheOwner’sManualforprogramminginstructions.
ELECTRONICALLY OPERATED DRIVER SEAT
Slide/Tilt Switch
Pushforwardorbackwardto
slideseatbottom.Seatcan
alsoberaised,loweredor
tiltedwiththiscontrol.
Recline Switch
Pushforwardorbackward
toadjustseatbackangle.
Lumbar Adjustment
Pushswitchto
increaseordecrease
lumbarsupport.
Memory Seat Switch
164831_09a_RX-8_SSG_081208.indd 4 8/12/08 3:47:50 PM