Black plate (138,1)
qSpeedometer
The speedom eter indicates the speed of
the vehicle.
qOdometer, Trip Meter and Trip
Meter Selector
The displ ay mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector while one of them is displayed.
The selected mode will be displayed.
Selector
Odometer
Trip meter A
Press the selector
Press the selector
Press the selector
Trip meter B
NOTE
The odometer and trip meter can be displayed
and the selector can be operated as follows
even when the ignition is switched to ACC or
the ignition is switched off. The trip meter can
be switched/reset by pressing the selector.
l
Displays for approx. 10 minutes after the
ignition is switched to ACC or the ignition
is switched off from ON.
l
Displays for approx. 10 minutes after the
driver's door is opened.
Odometer
When this mode is selected, ODO will be
displayed.
The odometer record s the total distance
the vehicle has been driven.
5-30
Driving Your Mazda
Instrument Cluster and Indicators
Mazda2_8CC8-EC-11H_Edition1 Page138
Wednesday, July 20 2011 9:35 AM
Form No.8CC8-EC-11H
To Next Page
Loading...
