Black plate (37,1)
Child-Restraint System
Installation Position
In this owner's manual, explanation of
child-restraint systems is provided for the
following three types of p opular child-
restraint systems: infant seat, child seat,
booster seat.
NOTE
l
Installation position is determined by the
type of child-restraint system. Always read
the manufacturer's instructions and this
owner's manual carefully.
l
Due to variations in the design of child-
restraint systems, vehicle seats and seat
belts, all child-restraint systems may not fit
all seating positions. Before purchasing a
child-restraint system, it should be tested in
the specific vehicle seating position (or
positions) where it is intended to be used. If
a previously purchased child-restraint
system does not fit, you may need to
purchase a different one that will.
Infant seat
An infant seat provides restraint by
bracing the infant's head, neck and back
against the seating surface.
Child seat
A child seat restrains a child's body using
the harness.
Booster seat
A booster seat is a child restraint
accessory designed to improve the fit of
the seat belt system around the child's
body.
Essential Safety Equipment
Child Restraint
2-25
Mazda2_8CC8-EC-11H_Edition1 Page37
Wednesday, July 20 2011 9:34 AM
Form No.8CC8-EC-11H
To Next Page
Loading...
