Mazda 2012 MX-5 - Page 261

Black plate (260,1)
(Programming with “text” display (e.g.
channel na me))
1. Select the desired channel to be
programmed. At this point, the
following is displayed:
[SR
(bank numbe r) (selected text
(e.g. channel name))]
2. Keep pressing the channel preset
button for 1.5 seconds or more.
The programming process is complete
after the text (e.g. channel name)
flashes. Then, [SR
(bank numbe r)]
is displayed and you will hear beep
sound at the same time.
3. SR
(bank number) CH (preset
number)
(channel numbe r)] are
displayed.
4. Three seconds later, it returns to norm al
display. [SR
(bank number) (text
(e.g. channel name))]
NOTE
Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up
Press and release the channel preset
button,
[SR
(bank numbe r) CH (preset
number)
(channel numbe r)] appears.
When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
Category change
Press the category button (
or )
and select the desired category.
l
Press the category button ( ):
Category up
l
Press the category button ( ):
Category down
Every time the category button (
)is
pressed, the category is changed over in
the order shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
Highest category → All categories →
Lowest category
NOTE
While all categories are selected, all channels
covering a category can be accessed
(Category off condition).
Channel selection within a category
If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
l
Turn the manual tuning dial clockwise:
Channel Up
l
Turn the manual tuning dial
counterclockwise: Channel Down
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
6-38
Interior Comfort
Audio System
MX-5_8CC2-EC-11F_Edition1 Page260
Tuesday, May 31 2011 11:59 AM
Form No.8CC2-EC-11F