R099/13
Page 17 of 19
26. The screen below will be displayed.
NOTE: A blank screen is displayed momentarily. It will take approx. 2 minutes before the
reflashing pro-cess moves to the next screen.
27. Reinstallation will start from 0% and as the reflashing process takes place, the progress
bar will gradually increase to 100%.
NOTE: In order to avoid the ACC power being turned off during the reflashing
process, press and release the clutch pedal (Manual Transaxle) or the brake
pedal (Automatic Transaxle) before 25 minutes if needed.
NOTE: It may be difficult to read the display at times as it becomes dark, but “Do not restart
vehicle at this
time” is displayed.
To Next Page
Loading...
