Black plate (142,1)
Shifting
Manually Shifting up
(M1 → M2 → M3 → M4 → M5)
To shift up to a higher gear, move the shift
lever back (
) once.
NOTE
l
When driving slowly, the gears may not
shift up.
l
In manual shift mode, gears do not shift up
automatically. Do not run the engine with
the tachometer needle in the RED ZONE. If
the tachometer needle enters the RED
ZONE, you may feel engine-braking
because the fuel delivery will be stopped to
protect the engine. However, this does not
indicate an abnormality.
l
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
Manually Shifting down
(M5 → M4 → M3 → M2 → M1)
To shift down to a lower gear, move the
shift lever forward (
) once.
WARNING
Do not use engine braking on slippery
road surfaces or at high speeds:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed
could cause the tires to skid. This
could lead to loss of vehicle control
and an accident.
NOTE
l
When driving at high speeds, the gear may
not shift down.
l
During deceleration, the gear may
automatically shift down depending on
vehicle speed.
l
When depressing the accelerator fully, the
transaxle will shift to a lower gear,
depending on vehicle speed.
5-16
Driving Your Mazda
Starting and Driving
Mazda5_8DW4-EC-14H_Edition3 Page142
Friday, January 16 2015 4:25 PM
Form No.8DW4-EC-14H
To Next Page
Loading...
