Driving
Y
our Mazda
5-50
t To Cancel:
To turn off the system, use one of these
methods:
S Press the OFF switch. The cruise
control is cancelled.
S Press the brake or clutch pedal (if
equipped)
slightly
. The cruise control
is turned off, but can be reset by
pressing SET ACCEL or RSM.
WARNING
Avoiding High Engine RPM:
Do not shift the transmission into
N (Neutral) with the cruise control
on,
as high engine RPM run up will
occur until the cruise control is
turned off.
The
system is of
f when the ignition is of
f.
NOTE
Cruise control will cancel at about
8
to 14 mph (13-23
km/h) below the
preset speed.
J To
Incr
ease Cruising Speed:
Follow either of these procedures.
S Press
and hold SET ACCEL. Release
the
control when the
desired speed is
reached.
S Accelerate with your accelerator
pedal. When the desired vehicle
speed is reached, press and release
SET ACCEL.
Your
vehicle has a ‘
‘tap-up’
’ feature
that
allows you to increase your current
speed
in increments of 1 mph (1.6 km/h)
by
a momentary tap of the SET ACCEL
button.
Multiple taps of
the SET ACCEL
button will increase your vehicle speed
1
mph (1.6 km/h) for each tap. For exam
-
ple, if you are currently set at 60 mph
(96 km/h) and tap the SET ACCEL
button 5 times, your vehicle speed will
increase and set at 65 mph (104 km/h).
To Next Page
Loading...
