EasyManua.ls Logo

Mazda B2300 2001 - Page 72

Mazda B2300 2001
388 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Knowing
Y
our Mazda
3-10
3. Install
the new battery with the posi
-
tive (+) side up as marked.
4. Snap the two halves back together.
J
Replacing
Lost T
ransmitters
If
a remote transmitter has been lost and
you would like to remove it from the
vehicle’s memory, or you would like to
purchase additional remote transmitters
and have them programmed to your
vehicle:
S take
all your vehicle’
s transmitters to
your dealer for programming, or
S perform
the programming
procedure
yourself.
J Programming
T
ransmitters
To reprogram the transmitters yourself,
place the key in the ignition and turn
from OFF to ON eight times in rapid
succession (within 10 seconds) ending
in ON. After doors lock/unlock, press
any
control on all transmitters (up to four
possible) within 20 seconds. The doors
will
lock/unlock one last time to
confirm
completion of program mode. When
completed, switch the ignition to OFF.
Again
the doors will lock/unlock one last
time
to confirm completion of program
-
ming.
All
transmitters
must
be programmed at
the same time.

Related product manuals